Mipa P 70 Metallic PE filler incl. hardener is an aluminium pigmented polyester high build filler for body repair, restoration and surface correction. The metallic filler structure gives the material a robust filling character where dents, uneven areas and damaged panels need a stable base before further finishing.
Mipa P 70 is useful when the repair calls for more body than a fine finishing filler can provide. The filler builds shape, fills unevenness and sands into a clean repair contour after curing. The included hardener keeps the material set complete, so the filler and hardener are available as one matched repair item.
The metallic character makes P 70 a good fit for demanding repairs on common repair substrates where a firm filler layer is needed. It belongs in the filler stage before primer, surfacer and topcoat work. Clean substrate preparation, correct hardener dosage and proper sanding remain essential for a dependable repair result.
Mipa P 70 should be used with the correct filler application process. The filler is not a final coating and should not be left exposed as the finished surface. After sanding, the repair should continue with the required primer or filler system before colour and clearcoat are applied.
| Product type | PE high build body filler, metallic |
|---|---|
| Hardener | Included |
| Main use | Filling dents, unevenness and repair contours |
| Stage in repair | Body filler stage before primer or surfacer |
| Finish role | Creates a sandable repair base, not a final coating |
| Option | Article number | EAN / GTIN |
|---|---|---|
| 1 kg | 288510000 | 4016176026016 |
| 2 kg | 288520000 | 4016176081282 |
No. P 70 is a high build metallic body filler for filling and shaping before finer finishing steps.
Yes. The listed Mipa P 70 items are supplied with hardener.
No. After curing and sanding, the repair should continue with the correct primer, filler and coating system.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
