Mipa Thinner ESI is the dedicated thinner for Mipa 1K-ESI High Zinc primer systems. It is used to set Mipa Thinner ESI 5 l to the right viscosity for the chosen application method without stepping outside the intended system setup.
A matched thinner matters on zinc-rich primer because application behaviour, laydown and drying all depend on the coating being adjusted correctly. This thinner is formulated for that role, whether the primer is sprayed or used on smaller areas by brush or roller where permitted by the coating system.
The 5 litre pack suits regular industrial use and larger preparation volumes. It keeps the thinning step consistent from job to job so the primer can be applied with the intended flow and without unnecessary compromise in handling.
Rather than serving as a universal thinner for every coating in the shop, Mipa Thinner ESI 5 l has a specific job inside the ESI zinc primer system. It is the right choice when that primer has to be brought to working viscosity in a controlled and system-correct way.
| Product type | Special thinner |
|---|---|
| Content | 5 l |
| Use | For Mipa 1K-ESI High Zinc primer |
| System function | Viscosity adjustment |
| Hazard note | Inflammable |
| Article number | 030050000 |
|---|---|
| EAN / GTIN | 4016176378719 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
