Mipa WEP 9300-25 is the hardener component used with compatible waterborne Mipa 2K epoxy coating systems. It is mixed into the base product to start the curing process and turn the coating into a durable, chemically resistant epoxy film with the properties expected from a proper 2K system.
In practical coating work the hardener is not treated as a standalone product but as the key curing component that lets the epoxy coating reach its intended hardness, adhesion and resistance. It is kept with the matching WEP materials so the coating system stays complete and can be mixed correctly whenever a job starts.
This matters on waterborne epoxy primers and floor or protective coatings where the cured film has to hold up under real service conditions. Using the correct hardener keeps the application behaviour predictable and helps the coating cure the way the original system was designed to perform.
The 1 kg pack suits matching system quantities, restocking of hardener components and controlled mixing on waterborne epoxy jobs. It is a system-specific product for reliable curing rather than a universal hardener, and it should be used only with the compatible Mipa WEP materials specified for it. It keeps the system controlled from mixing or preparation through to the next coating step.
| Product type | Waterborne 2K EP hardener |
|---|---|
| System | Compatible Mipa WEP epoxy coatings |
| Role | Curing component |
| Use | Mixed into the base product before application |
| Pack size | 1 kg |
| Article number | 129110000 |
|---|---|
| EAN / GTIN | 4016176329575 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
