Mipa PL 6 is an elastic 2K polyester body filler with a longer open time than standard fillers, which makes it suitable for larger-area filling work. It is used on commercial vehicles, buses, rail vehicles and other large body sections where the filler should stay workable long enough to spread properly across broader repairs.
The filler adheres to steel, zinc, aluminium, GRP and commonly used plastics in vehicle construction. Because of its small grain size it can also be applied in very thin layers, which helps when the repair needs both broad levelling and more refined finishing without switching immediately to a second filler type.
The extended pot life makes it easier to work across larger sections and shaped body panels before Mipa PL 6 pulling spatula 2 kg incl. hardener starts to tighten. That is a practical advantage on long sides, corners, panel transitions and reinforced sections where rapid-setting filler can be limiting rather than helpful.
This 2 kg set includes hardener and is well suited to body and panel repair where elasticity, spreadability and controlled working time matter more than a fast snap cure. It is a dependable filler for vehicle body repairs that need room to be shaped cleanly before sanding. It keeps the system controlled from mixing or preparation through to the next coating step.
| Product type | 2K polyester body filler |
|---|---|
| Character | Elastic with extended open time |
| Colour | Beige |
| Substrates | Steel, zinc, aluminium, GRP, vehicle plastics |
| Pack format | 2 kg incl. hardener |
| Pot life | Approx. 5.5 to 6.5 minutes |
| Article number | 188620000 |
|---|---|
| EAN / GTIN | 4016176187120 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
