Description
Mipa 2K Transparent Sealer is a Primer for repairs and contour work on prepared substrates. It combines easy shaping and sanding with the adhesion needed before the next coating steps.
Product details
Colourless two-component adhesion promoter to recoat paintworks without preliminary sanding. Especially economical for overcoating and application of lettering.
Where does this product work best?
Use this filler for repairing uneven areas, shaping contours and preparing the substrate before primer and topcoat. It is intended for repair work where flexibility, adhesion and sanding properties matter.
Use and processing
Mix the filler with the supplied hardener in the stated ratio (2:1). Apply in thin layers on a clean, sanded substrate, allow it to cure and then sand to the required contour.
Key features
- Primer
- Finish / colour: transparent
- Size / content: 1 l, 3 l
Technical data
| Product type | Primer |
| Size / content | 1 l, 3 l |
| Finish / colour | transparent |
| Mixing ratio | 2:1 |
| Thinner | Mipa 2K-Thinner Normal V 25 |
| Drying / flash-off | 5 – 8 min between the coats 10 – 15 min before oven drying |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table.
