Description
Mipa 1K-Glasprimer serves as adhesion promoter for glass surfaces before applying Mipa 2K-acrylic and PUR topcoats or Mipa two-coat basecoats. Generally, this product ensures sufficient adhesion on most glass surfaces.
Product details
On difficult glass surfaces or in case of particularly high requirements on glass coatings it is recommended to use Mipa Glashärter PU 950-25 in combination with a subsequent Mipa 2K-coating. Please consider the technical data sheet of Mipa PU 950-25.
Where does this product work best?
Use this clearcoat as the final transparent layer over compatible colour coats. The listed application areas include glass.
Application notes
Shake the can thoroughly before use and spray several even coats on a correctly prepared surface. Observe the flash-off time between coats and allow the film to dry fully before sanding, polishing or overcoating. From +10 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation
Key features
- Primer
- Size / content: 1 l
- Pack information: 6 x 1 l
- Aerosol format for smaller areas and local work
- GTIN: 4016176377354
Technical details
| Product type | Primer |
| Size / content | 1 l |
| Pack information | 6 x 1 l |
| Suitable for | glass |
| Pot life | Spray / processing viscosity: |
| Processing conditions | From +10 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation |
| Storage | At least 9 months in unopened original container |
| GTIN | 4016176377354 |
| Often used together with |
|
For the compatible hardener options for this product, see the linked products in the technical information table.
