Mipa P 44 is a 1K pore filler used where the surface looks smooth at first glance but still carries micro-pores that can show through later. It is especially useful on GRP, on repaired filler surfaces and on sanded-through sections where the substrate would otherwise pull in the next coating unevenly.
One of its key jobs is to close those tiny open spots before the filler stage continues. That helps the next coats level more evenly and reduces the chance that pores, sinkage or visible edge marks reappear after finishing. On breakthrough areas it also works as an absorption barrier, so the following filler stage is not pulled harder into the exposed zone than into the surrounding surface.
That makes P 44 suitable for cleaner transitions in repair work. Instead of simply stacking on more filler and hoping the surface settles down, it addresses the small absorbent or porous areas that often cause trouble later in the process. The result is a better prepared base for the next primer or filler step.
The 850 ml pack suits regular refinish use where repaired areas, GRP sections or old breakthrough zones appear often enough to justify a dedicated pore-filling stage. When the goal is a surface that stays smooth after coating instead of printing small defects back through, this is Mipa P 44 1K pore filler 850 ml used before the job moves on.
| Product type | 1K pore filler |
|---|---|
| Colour | Dark grey |
| Content | 850 ml |
| Use | Micro-pore filling and absorbency barrier |
| Flash-off time | 15 min before filler application |
| Application area | GRP, filler surfaces and sand-through areas |
| Article number | 225110000 |
|---|---|
| EAN / GTIN | 4016176650815 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
