Description
Mipa Struktur-Additiv fein is an additive for Mipa OC-, AC-, PUR HS-paints as well as for Mipa 2K clearcoats to create textured elastic 2K paints. Especially suitable to paint slightly textured vehicle plastic parts like bumpers or exterior mirrors.
About this product
Additive for Mipa OC- and PUR HS-paints and 2K-clearcoats to formulate elastic structure paints for plastic. Spreading rate: — Processing instructions
What is this product used for?
Use this clearcoat as the final transparent layer over compatible colour coats. The listed application areas include plastic parts.
Application notes
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (1:1) with as mentioned in the technical data sheet of the base paint; adjust with see technical data sheet of base paint if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. from +10°C and up to 80% relative humidity. Ensure adequate air ventilation
Key features
- Additive
- Size / content: 1 l
- Suitable for: plastic parts
- Mixing ratio: 1:1
- GTIN: 4016176040371
Technical data
| Product type | Additive |
| Size / content | 1 l |
| Pack information | 3 x 1 l |
| Suitable for | plastic parts |
| Mixing ratio | 1:1 |
| Pot life | see technical data sheet of base paint Spray / processing viscosity: see technical data sheet of base paint |
| Processing conditions | from +10°C and up to 80% relative humidity. Ensure adequate air ventilation |
| Storage | at least 3 years in unopened original container |
| GTIN | 4016176040371 |
