Description
Mipa 1K-UV-Klarlack is a high-quality UV-curing clearcoat system for fast and efficient refinishing of small damages and for spot repair. It cures only after only 5 minutes of irradiation with a UV LED lamp or Hg lamp (mercury vapour lamp).
Product details
Thus significant savings can be made by eliminating heating-related costs. In the same time, cycles times are reduced since the painting process is not interrupted by heating intervals.
What is this product used for?
Use this clearcoat as the final transparent layer over compatible colour coats when a clear look is required.
Application notes
Shake the can thoroughly before use and spray several even coats on a correctly prepared surface. Observe the flash-off time between coats and allow the film to dry fully before sanding, polishing or overcoating. from +15 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Features
- 2K clearcoat spray
- Finish / colour: clear
- Size / content: 1 l
- Pack information: 6 x 1 l
- UV resistance
- Aerosol format for smaller areas and local work
Technical details
| Product type | 2K clearcoat spray |
| Size / content | 1 l |
| Finish / colour | clear |
| Pack information | 6 x 1 l |
| Processing conditions | from +15 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| Storage | at least 1 year in unopened original container, storage at room temperature (20 °C) VOC Regulation : EU limit value of the product (cat |
| GTIN | 4016176619263 |
