Description
Hardener PK red 200 g PE hardener paste in cartridges (Mipa) is a body filler for repairs and contour work on prepared substrates. It combines easy shaping and sanding with the adhesion needed before the next coating steps.
About this product
Hardener PK red 200 g PE hardener paste in cartridges (Mipa) is a hardener in 200 g format, made for use with the compatible coating system.
Where does this product work best?
Use this filler for repairing uneven areas, shaping contours and preparing the substrate before primer and topcoat. It is intended for repair work where flexibility, adhesion and sanding properties matter.
How to use
Mix the filler with the supplied hardener until the colour is uniform. Apply in thin layers on a clean, sanded substrate, allow it to cure and then sand to the required contour.
Highlights
- Body filler
- Finish / colour: red
- Size / content: 200 g
- GTIN: 4016176164848
Technical details
| Product type | Body filler |
| Size / content | 200 g |
| Pack information | 12 x 200 g |
| Finish / colour | red |
| GTIN | 4016176164848 |
Frequently Asked Questions
What is Hardener PK red 200 g PE hardener paste in cartridges used for?
Use this filler for repairing uneven areas, shaping contours and preparing the substrate before primer and topcoat. It is intended for repair work where flexibility, adhesion and sanding properties matter.
Which substrates are mentioned for Hardener PK red 200 g PE hardener paste in cartridges?
The listed substrates include the prepared repair substrates named in the product information.
