Mipa P 60 S Grey 1 l is a high build polyester spray filler set supplied with Hardener PS for direct mixing and spray use. Mipa P 60 S grey 1 l Polyester thick-film spray filler incl. 50 ml hardener PS is made for filling uneven areas, deep sanding traces and rough prepared repair zones where a conventional fine filler would need too many passes to build enough material.
The high build character gives Mipa P 60 S grey 1 l Polyester thick-film spray filler incl. 50 ml hardener PS its place. It can lay down a strong filler layer in one filler stage, which helps bring broad irregularities, coarse preparation marks and uneven surfaces back toward a sandable, coating-ready level. The grey colour keeps the sprayed area easy to read while blocking through less than a lighter filler on darker topcoats.
Suitable substrates include steel, aluminium, GRP, wood and sanded sound old paintwork, so it covers a wide selection of filler tasks before later primer or topcoat steps. Once cured, the film can be sanded back into shape to create a stable and uniform surface for the following layers.
This is a sprayable polyester filler rather than a finishing putty, so it belongs where build, volume and surface correction matter first. When large sanding grooves or rough pre-repair work have to disappear efficiently, P 60 S moves more material to the surface than a thin finishing product can.
The set contains 950 ml of filler and 50 ml of Hardener PS, which keeps Mipa P 60 S grey 1 l Polyester thick-film spray filler incl. 50 ml hardener PS ready for use as one matched package. It is a dependable high build choice whenever the surface still needs real correction before it can move into finer preparation.
| Product type | High build polyester spray filler set |
|---|---|
| Colour | Grey |
| Set contents | 950 ml filler plus 50 ml Hardener PS |
| Substrates | Steel, aluminium, GRP, wood, sanded old paint |
| Thinner | Mipa PE Thinner if required |
| Article number | 287010000 |
|---|---|
| EAN / GTIN | 4016176001198 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
