Description
Mipa 1K-UV-Füller is a high-quality, UV-drying filler for fast and economic refinishes, which can be sanded already after 5 minutes irradiation by a UV LED-Light or mercury vapour lamp.
About this product
Alternatively, sanding is also possible after a 4 – 5 minutes exposure to direct sunlight. It is therefore possible to save significantly heating-related costs.
What is this product used for?
This product is intended for professional coating work on plastic with a grey finish.
How to use
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Apply even coats and respect the flash-off, drying and recoating times of the full system. From +15 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation
Highlights
- Primer
- Finish / colour: grey
- Size / content: 1 l
- Pack information: 6 x 1 l
- Suitable for: plastic
- Fast drying
Technical details
| Product type | Primer |
| Size / content | 1 l |
| Finish / colour | grey |
| Pack information | 6 x 1 l |
| Suitable for | plastic |
| Pot life | related hardening |
| Processing conditions | From +15 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation |
| Storage | At least 1 year at room temperature (20 °C) in unopened original container |
| VOC | EU limit value for this product (category B / c): 540 g / l. This product contains < 400 g / l of VOC |
| GTIN | 4016176607079 |
Common questions
What is Mipa 1K UV filler grey 1 l used for?
This product is intended for professional coating work on plastic with a grey finish.
Which substrates or application areas are mentioned for Mipa 1K UV filler grey 1 l?
The listed substrates or application areas include plastic.
What finish is shown for Mipa 1K UV filler grey 1 l?
The listed finish is grey.
