Description
2-component polyurethane wet-on-wet filler which can be already recoated after approx.
Product details
15 minutes without loss of gloss. Especially designed for car repair.
What is this product used for?
This product is intended for professional coating work on commercial vehicles, cars, steel, and aluminium with a light grey finish.
How to use
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (5:1) with H 10, MS 10, MS 25; adjust with Mipa 2K-Thinner if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. From +10 °C and up to 80 % relative air humidity. Ensure an adequate supply and exhaust air ventilation
Highlights
- Primer
- Finish / colour: light grey
- Size / content: 1 litre
- Pack information: 6 x 1 l
- Suitable for: commercial vehicles, cars, steel, and aluminium
- Gloss finish
Technical details
| Product type | Primer |
| Size / content | 1 litre |
| Finish / colour | light grey |
| Pack information | 6 x 1 l |
| Suitable for | commercial vehicles, cars, steel, and aluminium |
| Mixing ratio | 5:1 |
| Hardener | H 10, MS 10, MS 25 |
| Thinner | Mipa 2K-Thinner |
| Processing conditions | From +10 °C and up to 80 % relative air humidity. Ensure an adequate supply and exhaust air ventilation |
| Storage | at least 3 years in unopened original container |
| GTIN | 4016176470369 |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table.
