Mipa silicone remover in liquid format or Mipa silicone remover spray removes grease, dirt and handling residue before sanding, priming or topcoating.
Guided shopping manual
An aluminium fence needs degreasing, careful keying, a suitable primer and a durable semi gloss finish. This guide uses Mipa WEP 1000-20, Mipa PU 250-50 and the matching components for aluminium metalwork.
Mipa silicone remover in liquid format or Mipa silicone remover spray removes grease, dirt and handling residue before sanding, priming or topcoating.
MP Sanding Sponge prepares corners, bars and detailed metal surfaces so the next coating layer has a clean mechanical profile.
Mipa WEP 1000-20 with Mipa WEP 9500-25 hardener and Mipa WBS deionised water prepares galvanized, aluminium or difficult coated metal for the topcoat stage.
Mipa 1K Epoxy Primer Spray supports smaller metal sections and detailed fence areas before the final coating method.
Mipa PU 250-50 in the relevant price groups gives the fence or railing a durable semi gloss industrial finish in the chosen colour method.
Mipa PUR Plus Hardener A60 and Mipa 2K Thinner Normal V 25 are used in the PU topcoat stage and help the final coating cure and apply correctly.
Clean the aluminium fence thoroughly so dirt, oils and surface contamination do not reduce adhesion.
Key edges, welds and detailed areas so the primer stage can bond to a clean and stable surface.
Use the epoxy primer method matched to the metal type before the final semi gloss coating is applied.
Apply Mipa PU 250-50 with the correct hardener and thinner so the final layer protects the prepared metal and gives an even semi gloss look.
Let the aluminium fence cure before frequent touching, gate movement, cleaning or weather exposure becomes heavy.
Use WEP 1000-20 after cleaning and keying so the aluminium fence has a suitable base for the final coating.
Use 1K Epoxy Primer Spray where small rails, posts or edges need a practical aerosol primer step.
Use PU 250-50 with its required hardener and thinner for the final exterior coating.
Prepare one less visible part of the aluminium fence first and check adhesion, colour and sheen before coating the most visible faces.
© 2026 All Rights Reserved.