Mipa WBS VE Water is the dedicated thinner for Mipa waterborne coating products. It is used to adjust application viscosity without compromising the balance of the WBS system. That sounds simple, but in practice it matters a great deal: the right thinner helps maintain flow, atomisation and processing behaviour, while the wrong addition can throw a coating off before it even reaches the surface.
Mipa WBS deionised water 5 l is therefore less about volume and more about control. In everyday paint preparation it is the system component that helps spray materials reach the working viscosity required for clean application. Whether the job involves primers, single-coat industrial paints, epoxy waterborne products or other Mipa WBS materials, having the correct thinner on hand makes setup easier and results more predictable. It is especially useful in environments where different waterborne products are mixed, adjusted and sprayed regularly.
Using the proper thinner also helps refinishers stay within the logic of the coating system instead of improvising. That is important when a finish needs to level correctly, cover evenly and dry in the way the technical data expects. With system thinners, the benefit is not glamour but consistency: one more variable is controlled before the paint reaches the part, panel or floor.
For that reason, Mipa WBS VE Water belongs with any stock of Mipa waterborne materials. It supports cleaner preparation, more reliable spray adjustment and fewer avoidable issues caused by unsuitable dilution. If Mipa WBS deionised water 5 l being applied is a Mipa WBS coating, this is the thinner refinishers should reach for first.
| Product type | Thinner for Mipa WBS products |
|---|---|
| Purpose | Viscosity adjustment and system-compatible thinning |
| Compatible systems | Mipa waterborne coating products |
| Pack size | 5 l |
| Article number | 197850000 |
|---|---|
| EAN / GTIN | 4016176150018 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
