Mipa WBS Cleaner prepares the surface inside the waterborne system, removing contamination that can disturb flow, adhesion or the final look.
Guided shopping manual
Wooden chairs and tables need a smooth, clean surface and a finish that can handle regular touch, cleaning and visible wear. This page focuses on the waterborne WBS method for a refined satin matt result.
Mipa WBS Cleaner prepares the surface inside the waterborne system, removing contamination that can disturb flow, adhesion or the final look.
Mipa WBS deionised water is the dedicated thinner for the WBS finish, used only when the coating needs controlled adjustment for brushing, rolling or spraying.
Mipa WPA 2100-40 gives a waterborne 1K PU acrylic satin matt finish for common wood surfaces, with a calm low-sheen look for furniture and visible interior pieces.
Remove dust, grease and old care products, paying attention to hands, arm rests, table edges and other areas that are touched often.
Sand with the grain until the surface is even and dull, then remove all sanding dust before coating starts.
Use Mipa WBS deionised water only when the WPA finish needs controlled viscosity adjustment for the application method.
Apply Mipa WPA 2100-40 evenly by brush, roller, curtain or flow coating where suitable, keeping edges and legs free from heavy buildup.
Allow the coating to dry and harden before stacking chairs, using table tops or cleaning the new surface.
Mipa WPA 2100-40 gives wooden chairs and tables a calmer low-sheen finish that suits furniture viewed and touched at close range.
Mipa WBS deionised water helps adjust the waterborne finish when needed, while keeping the coating inside the intended WBS method.
Mipa WBS Cleaner is important on older chairs and tables because skin oils, polish and cleaning residue can disturb the finish.
Turn chairs upside down first and coat hidden underside rails and leg returns before the visible faces. On tables, finish edges before the large top surface.
© 2026 All Rights Reserved.