Description
Mipa 1K-Plastic-Grundierfiller is a fast-drying plastic primer with good filling properties which can be applied to plastics commonly used in the automotive industry (e. g.
Product details
Due to its special formulation Mipa 1K-Plastic-Grundierfiller can also be applied on challenging plastic substrate such as PP without additional pre-treatment. Complex processes such as flame treatment or plasma processing become unnecessary in many cases.
Where does this product work best?
This product is intended for professional coating work on GRP, plastics, ABS, and PA with a light grey finish.
Application notes
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Adjust the product with approx. 100 % Mipa Verdünnung UN 21 where required by the system and application method. Apply even coats and respect the flash-off, drying and recoating times of the full system. From +10 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation
Highlights
- Primer
- Finish / colour: light grey
- Size / content: 1 l
- Pack information: 6 x 1 l
- Suitable for: GRP, plastics, ABS, and PA
- GTIN: 4016176520873
Technical data
| Product type | Primer |
| Size / content | 1 l |
| Finish / colour | light grey |
| Pack information | 6 x 1 l |
| Suitable for | GRP, plastics, ABS, and PA |
| Thinner | Mipa UN 21, Mipa Thinner UN |
| Pot life | Spray / processing viscosity: |
| Processing conditions | From +10 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation |
| Storage | at least 3 years in unopened original container VOC Regulation : |
| GTIN | 4016176520873 |
| Often used together with |
|
Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
