Mipa 2K Acrylic Primer Filler is the combined priming and filling step used when the surface needs more than a thin adhesion coat but less than a heavy correction filler. It gives build, grip and active anti-corrosive protection in one fast-drying grey product and comes here as a 10:1 set with hardener included.
Mipa 2K Acrylic Primer Filler grey 10:1 incl. hardener 1 kg is used on iron, steel, GRP, aluminium and galvanised substrates before the colour system goes on. It is especially useful where the surface already carries the right shape but still needs an even, uniform primer-filler layer to support the final finish. The filler properties help level light preparation marks while the primer character keeps the coating system well anchored to the substrate.
Because Mipa 2K Acrylic Primer Filler grey 10:1 incl. hardener 1 kg is intended for wet-on-wet use, it works well where speed matters and the aim is to move through the coating stages efficiently. At the same time, it still offers enough body to support a clean finish on repaired or newly prepared sections that need a more forgiving foundation than a very thin primer alone would provide.
The included hardener makes the 1 kg set practical for smaller repair work and controlled material use. When the job needs one product to combine adhesion, moderate build and corrosion protection before topcoating, this acrylic primer filler is the straightforward choice.
| Product type | 2K acrylic primer filler |
|---|---|
| Colour | Grey |
| Set size | 1 kg incl. hardener |
| Mixing ratio | 10:1 by weight; 7:1 by volume |
| Thinner | 15 – 20% Mipa 2K Thinner V 25 |
| Dry film thickness | 25 – 80 µm |
| Article number | 227710000 |
|---|---|
| EAN / GTIN | 4016176084221 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
