Description
Mipa 2K-HS-Klarlack CCD with 5 – 10 gloss units at a 60° angle is a VOC-compliant High-Solid acrylic clearcoat for high- quality, very mat coatings (partial or complete paintworks) in the car sector.
Product details
It ensures a uniform dull matt clear coat on solvent and water-based paints. Mipa 2K-HS-Klarlack CCD is highly resistant to all weather conditions as well as to chemical agents and mechanical stress.
Where does this product work best?
Use this clearcoat as the final transparent layer over compatible colour coats when a clear, matt look is required. The listed application areas include cars.
How to use
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (2:1 by weight; 3:1 by volume); adjust with Mipa 2K-Thinner See product information! if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. From +10 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation
Highlights
- 2K clearcoat
- Finish / colour: clear, matt
- Size / content: 1 l
- Pack information: 6 x 1 l
- Suitable for: cars
- Gloss finish
Technical information
| Product type | 2K clearcoat |
| Size / content | 1 l |
| Finish / colour | clear, matt |
| Pack information | 6 x 1 l |
| Suitable for | cars |
| Mixing ratio | 2:1 by weight; 3:1 by volume |
| Thinner | Mipa 2K-Thinner |
| Pot life | 1 h bei 20 °C Spray / processing viscosity: |
| Processing conditions | From +10 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation |
| Storage | At least 3 years in unopened original container |
| GTIN | 4016176618976 |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table.
