Mipa 2K HS Fillprimer 1 l is a two component polyurethane wet on wet filler for professional repair and coating work. The high solids fillprimer prepares the surface for further coating while supporting efficient processing in car repair, commercial vehicle and industrial applications.
The material is used where a wet on wet primer filler process is required. Recoating after approximately 15 minutes and a 5:1 mixing ratio with suitable hardeners make it practical for controlled refinishing workflows.
Wet on wet processing keeps the repair moving without a full sanding step between every layer when the system is used correctly. The HS fillprimer supports a smooth foundation for later coating while maintaining efficient process timing.
| Product type | 2K HS wet on wet fillprimer |
|---|---|
| Pack size | 1 litre |
| Colour | Light grey; dark grey |
| Mixing ratio | 5:1 with suitable Mipa hardener |
| Option | Article number | EAN / GTIN |
|---|---|---|
| Dark grey | 227810005 | 4016176470369 |
| Light grey | 227810000 | 4016176371932 |
It is used as a two component wet on wet filler before further coating work.
Suitable hardeners include H 10, MS 10 and MS 25, depending on the exact process.
Recoating is possible after approximately 15 minutes under the specified conditions.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
