Description
Mipa 2K-HS-Löser is a special mixture of solvents (fade-out thinner) to dissolve edges of spot repairs and fade-out areas for Mipa 2K-HS topcoat systems.
Product information
Mipa 2K-HS-Löser can be used as fade-out thinner in combination with following products: Mipa PUR HS, Mipa OC, Mipa 2K-MS-Klarlacke (clearcoat), Mipa 2K-HS-Klarlacke (clearcoat) After having applied one of these products, spray immediately Mipa 2K-HS-Löser over the border areas (overspray areas). Melt the overspray edges with a very uniform coat of Mipa 2K-HS-Löser until the rough overspray become visibly smooth.
Where does this product work best?
Use this clearcoat as the final transparent layer over compatible colour coats.
Use and processing
Shake the can thoroughly before use and spray several even coats on a correctly prepared surface. Observe the flash-off time between coats and allow the film to dry fully before sanding, polishing or overcoating. From +10 °C and up to 80 % relative air humidity. Ensure an adequate supply and exhaust air ventilation
Features
- Additive
- Size / content: 1 l
- Pack information: 6 x 1 l
- Aerosol format for smaller areas and local work
- GTIN: 4016176305036
Technical information
| Product type | Additive |
| Size / content | 1 l |
| Pack information | 6 x 1 l |
| Pot life | Spray / processing viscosity: |
| Processing conditions | From +10 °C and up to 80 % relative air humidity. Ensure an adequate supply and exhaust air ventilation |
| Storage | at least 3 years in unopened original container VOC Regulation : |
| GTIN | 4016176305036 |
