Description
This high-quality zinc dust coating ensures long-term cathodic corrosion protection and can be applied only on bare, completely rust-free steel that has been blasted to cleaning degree Sa 2½.
About this product
Recoatable with Mipa 2K EP and 2K PU paint systems complying with coating structures for corrosion protection as described in DIN EN ISO 12944. Registered according to Bundeswehr (German army) TL 8010-0012, class B, type 3
What is this product used for?
This product is intended for professional coating work on steel.
Use and processing
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (19:1; 10:1) with Mipa PU 912-xx; adjust with Mipa 2K-Thinner if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Highlights
- Anti-corrosion coating
- Size / content: 19 kg
- Suitable for: steel
- Corrosion protection
- Mixing ratio: 19:1; 10:1
- GTIN: 4016176086911
Technical information
| Product type | Anti-corrosion coating |
| Size / content | 19 kg |
| Suitable for | steel |
| Mixing ratio | 19:1; 10:1 |
| Hardener | Mipa PU 912-xx |
| Thinner | Mipa 2K-Thinner |
| Pot life | 10 – 12 h Spray / processing viscosity: |
| Processing conditions | From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| Storage | For at least 2 years in the unopened original container. Optimum storage conditions between + 5 °C and + 25 °C, avoid direct sunlight |
| VOC | < 480 g / l.** |
| GTIN | 4016176086911 |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table. Where a matching primer, basecoat, clear coat or companion system product is explicitly supported, it is also linked there.
