Mipa Hardener PS 50 ml is the dedicated liquid hardener for Mipa P 60 S polyester spray filler. It is the reactive component that turns the filler from a sprayable mixed material into a curing filler film that can build, harden and later be sanded into shape.
Because this hardener is made specifically for P 60 S, it keeps the system simple. The filler and hardener are meant to work together in the stated ratio, which supports the expected pot life, curing behaviour and sanding performance of the polyester spray filler.
A matched hardener matters most with high build spray fillers because Mipa hardener PS 50 ml Liquid hardener for Mipa P 60 S has to cure evenly through a relatively strong film layer. Using the right liquid hardener helps Mipa hardener PS 50 ml Liquid hardener for Mipa P 60 S reach the intended body, adhesion and surface stability after spray application.
The 50 ml bottle is also practical as a replacement or reserve when separate stock is needed for repeated filler work. It does not serve as a general purpose hardener for unrelated products, but as the correct partner for the P 60 S system.
Kept next to P 60 S, this hardener makes sure the filler set remains complete and ready for proper mixing. It is a small pack with an essential job: giving the polyester spray filler the cure it needs to become a sandable, usable correction layer.
| Product type | Liquid hardener |
|---|---|
| Volume | 50 ml |
| Compatibility | Mipa P 60 S |
| Use | Curing component for polyester spray filler |
| Packaging | Bottle |
| Article number | 287120000 |
|---|---|
| EAN / GTIN | 4016176072600 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
