Mipa P 12 is a lightweight polyester filler with a reduced specific weight and a more fluid character than a conventional heavy filler. That combination helps spread Mipa P 12 3 l PE lightweight filler incl. hardener P red (1 x 50 g + 1 x 25 g) evenly over larger repaired sections and leaves a closed surface that stays easy to sand back into shape.
The 3 litre pack suits broader repair zones where more material is needed for levelling depressions, transitions and formed sections without reaching for several smaller tins. The filler builds well while still staying light enough for fast shaping and efficient removal during sanding.
Its low-density formula works well on steel, zinc, aluminium, GRP and wood, and the cured surface stays comparatively non-porous. That helps the next steps move more cleanly, with less chasing of pinholes and less effort needed to bring the repair area into a solid base for priming.
The included hardener set keeps Mipa P 12 3 l PE lightweight filler incl. hardener P red (1 x 50 g + 1 x 25 g) ready for direct mixing in the correct selection. This is a useful filler when the repair needs volume, easy spreading and fast sanding without the weight and drag that often come with a denser body filler.
| Product type | Lightweight polyester body filler |
|---|---|
| Content | 3 l incl. hardener |
| Colour | Light grey |
| Mixing ratio | 100:2 to 3 by weight |
| Pot life at 20 °C | 4 to 5 min |
| Substrates | Steel, zinc, aluminium, GRP, wood |
| Article number | 291330000S |
|---|---|
| EAN / GTIN | 4016176262735 |
© 2026 All Rights Reserved.
Start with the item. The job page shows what to use and in which order.
