Description
Mipa P 21 PE-Harz is a laminating resin that cures quickly with the hardener MEKP. In combination with glass fabric, glass mat or unwoven fibre glass it is a high performance system to repair easily and quickly larger holes in GRP parts and car body sheets.
Product information
Because of its good adhesion on iron and GRP it can be applied universally.
Typical applications
Use this hardener when a compatible Mipa 2K-PU glass coating has to bond correctly on glass. It is intended for systems that work with Mipa 1K-Glasprimer and is best kept for the exact products listed by the manufacturer.
Application notes
Add the hardener only to the specified glass coating system. Use Mipa 1K-Glasprimer as adhesion promoter and make sure the recoatable side of the glass has been identified before coating. Close the container immediately after use, because the hardener reacts with moisture. From +10 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation
Features
- Glass hardener
- Size / content: 1 kg
- Pack information: 6 x 1 kg
- Pot life: 10 – 15 min with Mipa Härter MEKP at 20 °C Spray / processing viscosity:
- GTIN: 4016176528459
Technical information
| Product type | Glass hardener |
| Size / content | 1 kg |
| Pack information | 6 x 1 kg |
| Suitable for | cars, GRP, and glass |
| Mixing ratio | 95:5 |
| Hardener | MEKP |
| Pot life | 10 – 15 min with Mipa Härter MEKP at 20 °C Spray / processing viscosity: |
| Processing conditions | From +10 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation |
| VOC | EU limit value for this product (category B / b): 250 g / l. This product contains max. 25 g / l of VOC |
| GTIN | 4016176528459 |
