Description
Mipa P 97 SF is a styrene-free body filler and putty with adhesion on steel plates, zinced plates, aluminium, tinned surfaces, GRP and wood. Short drying time, easy sandability as well as high-build application without pores are further characteristics of this premium product.
Product information
Especially creamy professional universal putty for all substrates, even alu, zinc and fibre glass, beige.
What is this product used for?
Use this filler for repairing uneven areas, shaping contours and preparing the substrate before primer and topcoat. It is intended for repair work where flexibility, adhesion and sanding properties matter.
Use and processing
Mix the filler with the supplied hardener in the stated ratio (100:2). Apply in thin layers on a clean, sanded substrate, allow it to cure and then sand to the required contour.
Highlights
- Body filler
- Finish / colour: beige
- Size / content: 1 kg
- Pack information: 12 x 1 kg
- Suitable for: steel, aluminium, GRP, and wood
- High-build formulation
Technical details
| Product type | Body filler |
| Size / content | 1 kg |
| Finish / colour | beige |
| Pack information | 12 x 1 kg |
| Suitable for | steel, aluminium, GRP, and wood |
| Mixing ratio | 100:2 |
| Pot life | 3 – 4 min with Mipa Härter P at 20 °C Spray / processing viscosity: |
| Drying / flash-off | , easy sandability as well as high-build application without pores are further characteristics of this premium product |
| GTIN | 4016176618815 |
| Often used together with |
|
Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
