Mipa Paint Spray “RAL COLOR” RAL 7030 Stone grey 400 ml

Mipa Paint Spray RAL COLOR RAL 7030 Stone grey 400 ml is a ready to spray 1K acrylic aerosol for accurate colour coating in the RAL 7030 shade. The colour gives a muted stone grey with a natural warm appearance, making it useful on outdoor fittings, prepared metal frames, equipment covers, utility parts and small repair zones. It brings controlled RAL colour to small and medium parts without mixing paint or setting up spray gun equipment.

Stone grey works well where a repair or fresh coating needs to look deliberate, neat and matched to a recognised RAL reference. The shade feels quiet, practical and more organic than cooler grey shades. That makes Mipa RAL COLOR useful for visible details as well as practical coated surfaces that need a clean finish after preparation.

Mipa RAL COLOR aerosol paint is built on fast drying 1K acrylic technology. The coating is designed for good coverage, lightfast colour stability, resistance against yellowing and a hard surface after curing. Scratch and shock resistance make the finish suitable for handled parts and everyday utility surfaces when the substrate has been prepared correctly.

Good preparation gives the best result. Sand old coatings, remove dust and grease, and apply a suitable primer on bare metal, plastic or sensitive substrates before the colour coat. Build the colour in light even coats, then allow the surface to dry and cure before assembly, polishing or repeated handling.

What is it used for?

• Colour coating in RAL 7030 Stone grey
• Touch ups on prepared parts, panels, housings and fittings
• Small repair areas where a recognised RAL shade is required
• Fresh colour on sanded and cleaned metal, coated surfaces or primed substrates

How is it used?

Shake the aerosol thoroughly before spraying and test the spray pattern first. Apply 2 to 3 light, even coats at the correct distance, allowing short flash off time between coats. Keep the can moving while spraying and clear the valve after use by spraying briefly upside down.

Technical information

Article number

FAQ

Does the aerosol need primer first?

Bare or sensitive substrates need the correct primer before the colour coat. Existing cured coatings should be sanded, cleaned and checked for compatibility before spraying.

Can it be used for exact colour repairs?

The RAL shade gives a recognised colour reference. Ageing, gloss level and previous coating condition can still influence visual matching on older surfaces.