Mipa Pore Filler is a wipe-on 1K product for closing the tiny surface pores that stay visible after repair or surface preparation. It is especially useful on porous plastic parts, but it also helps wherever micro-porosity would otherwise print through the next coating layers and spoil the final finish.
Instead of being sprayed like a normal filler, Mipa pore filler 250 g is rubbed across the surface with a clean lint-free cloth so it is worked directly into the pores. After a short drying time, the surplus is wiped away again, leaving the pore area filled rather than adding unnecessary material over the whole part.
That application method makes it practical for localised preparation where the surface is mostly ready but still shows fine open spots that need closing before the next primer or topcoat stage. It can save time and extra material compared with building more spray filler over the whole area just to deal with a small amount of porosity.
The 250 g pack is easy to keep on hand for finishing work on plastic repairs and other porous surfaces. When the surface already looks close to ready but still carries fine pores that could show up later, Mipa pore filler 250 g is the step that helps clean up that last detail before the coating continues.
| Product type | 1K wipe-on pore filler |
|---|---|
| Colour | Dark grey |
| Content | 250 g |
| Application method | Apply with clean lint-free cloth |
| Flash-off time | 5 – 10 min |
| Use | Filling micropores on porous surfaces |
| Article number | 224900000 |
|---|---|
| EAN / GTIN | 4016176094275 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
