Description
Mipa Quick-Primer-Spray was specially developed for small repairs and sanded-through areas, including spot repairs. This excellent one-component primer features a very smooth flow and low overspray, so that no further intermediate sanding is required in the spray mist zone.
Product details
Mipa Quick-Primer Spray can be overpainted directly wet-on-wet. It adheres excellently to iron, steel, zinc, aluminium and most plastics used in the automotive sector (PU, ABS, PC and PS; carry out test application if necessary).
Where does this product work best?
This product is intended for professional coating work on steel, aluminium, plastics, and ABS with a light grey (approx. RAL 7040) finish.
Use and processing
Shake the can thoroughly before use and spray several even coats on a correctly prepared surface. Observe the flash-off time between coats and allow the film to dry fully before sanding, polishing or overcoating.
Key features
- Primer spray
- Finish / colour: light grey (approx. RAL 7040)
- Size / content: 500 ml
- Pack information: 12 x 500 ml
- Suitable for: steel, aluminium, plastics, and ABS
- Fast drying
Technical data
| Product type | Primer spray |
| Size / content | 500 ml |
| Finish / colour | light grey (approx. RAL 7040) |
| Pack information | 12 x 500 ml |
| Suitable for | steel, aluminium, plastics, and ABS |
| Drying / flash-off | s at 20 °C Dust dry after approx. 5 min Set to touch after approx. 10 min Overcoatable after approx. 30 min Sandable after approx |
| GTIN | 4016176610635 |
| Often used together with |
|
Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
