Description
Mipa Rapidfiller is a one-component primer with very good filling properties, active corrosion protection and excellent adhesion on iron, steel, zinc and aluminium as well as on recoatable plastics commonly used in the automotive industry (we recommend verifying the recoatability).
Product information
Apply only on well degreased substrates. Sand slightly zinc and aluminium.
Typical applications
This product is intended for professional coating work on steel, aluminium, and plastics with a beige finish.
Application notes
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Adjust the product with 2K-Thinner where required by the system and application method. Apply even coats and respect the flash-off, drying and recoating times of the full system. from +10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Highlights
- Primer
- Finish / colour: beige
- Size / content: 1 l, 3 l
- Suitable for: steel, aluminium, and plastics
- Corrosion protection
Technical information
| Product type | Primer |
| Size / content | 1 l, 3 l |
| Finish / colour | beige |
| Suitable for | steel, aluminium, and plastics |
| Thinner | Mipa 2K-Thinner |
| Pot life | Spray / processing viscosity: |
| Processing conditions | from +10 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| Storage | at least 2 years in unopened original containers |
| VOC | EU limit value for this product (category B / c): 780 g / l This product contains max. 709 g / l of VOC |
| Often used together with |
|
For the compatible thinner options for this product, see the linked products in the technical information table.
