Description
Mipa Steinschlagschutz-Spray is an overcoatable, permanently elastic protection against stone chips, corrosion, de-icing salt and mechanical wear. Also suitable as anti-drumming compound, sealing film and underbody sealant.
About this product
Offers long-term and reliable protection for spoilers, sills, doors, rear valance, etc. Recoatable durable elastic protection against stonechips, corrosion, de-icing salt and mechanical wear.
What is this product used for?
This product is intended for professional coating work with a light-grey finish.
Application notes
Shake the can thoroughly before use and spray several even coats on a correctly prepared surface. Observe the flash-off time between coats and allow the film to dry fully before sanding, polishing or overcoating.
Highlights
- Primer spray
- Finish / colour: light-grey
- Size / content: 500 ml
- Pack information: 12 x 500 ml
- Aerosol format for smaller areas and local work
- GTIN: 4016176173611
Technical information
| Product type | Primer spray |
| Size / content | 500 ml |
| Finish / colour | light-grey |
| Pack information | 12 x 500 ml |
| Drying / flash-off | at 20 °C Dust dry after approx. 20 min Overcoatable after approx. 2 – 4 h Processing conditions From +10 °C and up to 80 % relative air humidity |
| GTIN | 4016176173611 |
| Often used together with |
|
Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
