Mipa Thinner 321 5 l is a dedicated thinner for compatible Mipa coating systems where Thinner 321 is specified. It is used to adjust compatible coating material within the relevant system, not as a universal reducer for every paint or primer in the available selection.
Correct thinner selection affects application viscosity, flow, spray behaviour and drying. A coating that is reduced with the wrong thinner can lose control, dry incorrectly or show finish defects. Thinner 321 should therefore be matched to the exact Mipa paint, primer or coating process that calls for this thinner.
The 5 litre container is practical when the same compatible system is used regularly. It can support viscosity adjustment before application and may be relevant for equipment cleaning where the coating instructions allow it. The safest method is always to follow the technical information for the base material being thinned.
Measure carefully and add only the amount required by the coating system. Mix thoroughly, check viscosity for the application method and keep the container closed between uses. Store and handle solvent based thinners with proper ventilation and safety protection.
Check the base material technical information first. Add the specified amount of thinner, mix thoroughly and apply the coating within the stated processing conditions.
| Item type | Thinner |
|---|---|
| Content | 5 l |
| Use | For compatible Mipa systems where Thinner 321 is specified |
| Article number | 272850000S |
|---|---|
| EAN / GTIN | 4016176608908 |
No. Use it only where the relevant Mipa system permits Thinner 321.
Thinner affects viscosity, flow, drying and final finish quality.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
