Mipa WBC Hardener 0.5 l is a UV-resistant isocyanate hardener for Mipa WBC paints. Its purpose is to crosslink the waterborne coating so the finished film becomes tougher, more resistant and better suited to surfaces that need more than the standard basecoat level of durability.
When used in the approved WBC system, the hardener increases both mechanical and chemical resistance. That makes it useful on interior surfaces where the colour coat is expected to carry the final finish without a separate clearcoat, and where a plain basecoat would not provide enough surface strength on its own.
The hardener also supports special WBC binder products such as soft-feel and design coatings that rely on the correct reactive component to reach their intended surface properties. In those systems, it is not just an add-on but a core part of how the coating dries, hardens and performs after application.
Mipa WBC hardener 0.5 l stays colourless and is used in measured mixing ratios with the relevant WBC coating. Pot life remains limited after mixing, so it is a support product for planned coating work rather than a material that sits ready mixed for long periods.
The 0.5 litre pack is a practical system component to keep next to WBC colours and binders whenever the coating build requires hardener activation. It is the correct partner when a waterborne WBC finish needs higher durability and a true crosslinked film.
| Product type | UV-resistant WBC hardener |
|---|---|
| Volume | 0.5 l |
| Colour | Colourless |
| Mixing ratio | 20:1 with compatible WBC coatings |
| Pot life | 2 to 3 h |
| Article number | 283500000 |
|---|---|
| EAN / GTIN | 4016176540130 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
