Description
Mipa Rapidprimer is a one-component adhesion primer with active corrosion protection for vehicles.
Product information
It is suitable for iron, steel, zinc and aluminium substrates as well as for recoatable plastics commonly used in the automotive industry (we recommend verifying the recoatability). Apply only on well degreased substrates.
Where does this product work best?
This product is intended for professional coating work on vehicles, steel, aluminium, and plastics with a redbrown finish.
Application notes
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Adjust the product with 2K-Thinner where required by the system and application method. Apply even coats and respect the flash-off, drying and recoating times of the full system. from +10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Key features
- Primer
- Finish / colour: redbrown
- Size / content: 1 l, 3 l
- Suitable for: vehicles, steel, aluminium, and plastics
- Corrosion protection
Technical information
| Product type | Primer |
| Size / content | 1 l, 3 l |
| Finish / colour | redbrown |
| Suitable for | vehicles, steel, aluminium, and plastics |
| Thinner | Mipa 2K-Thinner |
| Pot life | Spray / processing viscosity: |
| Processing conditions | from +10 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| Storage | at least 2 years in unopened original containers |
| VOC | EU limit value for this product (category B / c): 780 g / l This product contains max. 680 g / l of VOC |
| Often used together with |
|
For the compatible thinner options for this product, see the linked products in the technical information table.
