Description
Mipa EP 164-20 14 kg net 2K-EP thick-film primer various colours Gr. III is a 2K hardener for compatible Mipa 2K PU products. It is chosen to match the curing speed and processing window required by the selected topcoat or primer.
About this product
High-build 2K zinc phosphate epoxy primer for steel, zinced substrates, aluminium, GRP and mineral substrates.
Where does this product work best?
Use this hardener only with the Mipa products it is intended for. The selected hardener influences the curing speed, handling and final durability of the coating system.
Application notes
Add the hardener only to the matching Mipa product using the prescribed ratio (1:1). Process the mixture within the pot life and use the thinner, spray settings and drying schedule specified for the chosen base product. From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Features
- 2K hardener
- Finish / colour: RAL 7032
- Size / content: 14 kg
- High-build formulation
- Pot life: with hardener -10 approx. 5 h at 20 °C Spray / processing viscosity:
- GTIN: 4016176466805
Technical information
| Product type | 2K hardener |
| Size / content | 14 kg |
| Finish / colour | RAL 7032 |
| Suitable for | zinced substrates, zinced steel, steel, and aluminium |
| Mixing ratio | 1:1 |
| Hardener | Mipa EP 964-10 |
| Thinner | Mipa Thinner EP |
| Pot life | with hardener -10 approx. 5 h at 20 °C Spray / processing viscosity: |
| Processing conditions | From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| Storage | For at least 3 years in the unopened original container. Optimum storage conditions between + 5 °C and + 25 °C, avoid direct sunlight |
| GTIN | 4016176466805 |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table.
