Description
Mipa 1K-UV-Dickschichtfüller is a high-build, UV-drying filler for fast and efficient refinishing, which can be sanded after only 5 minutes of irradiation with a UV LED lamp or Hg lamp (mercury vapour lamp) even in case of high film thicknesses.
About this product
Alternatively, sanding is also possible after a 4-5 minutes exposure to direct sunlight. It is therefore possible to save significantly heating-related costs.
Where does this product work best?
This product is intended for professional coating work on steel and plastic.
Use and processing
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Apply even coats and respect the flash-off, drying and recoating times of the full system. From +15 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation
Key features
- Primer
- Size / content: 1 l
- Pack information: 6 x 1 l
- Suitable for: steel and plastic
- Fast drying
- High-build formulation
Technical details
| Product type | Primer |
| Size / content | 1 l |
| Pack information | 6 x 1 l |
| Suitable for | steel and plastic |
| Pot life | none, if stored in a lightproof area Spray / processing viscosity: Ready for use. If necessary, thin with Mipa Aceton |
| Processing conditions | From +15 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation |
| GTIN | 4016176597042 |
