Description
Mipa EP-Grundierfiller is a chromate-free 2K primer filler for an economic car and large vehicle coating. The product combines the properties of filler and adhesion promoter.
About this product
The high corrosion protection and the very good adhesion also on non-ferrous metals make this product perfectly suitable for composite substrates. Very good filling capacity and adherence to steel, aluminium, zinced steel and GRP.
What is this product used for?
Use this filler for repairing uneven areas, shaping contours and preparing the substrate before primer and topcoat. It is intended for repair work where flexibility, adhesion and sanding properties matter.
Application notes
Mix the filler with the supplied hardener in the stated ratio (2:1). Apply in thin layers on a clean, sanded substrate, allow it to cure and then sand to the required contour. From +10 °C and up to 80 % relative air humidity. Ensure an adequate supply and exhaust air ventilation
Features
- Primer
- Finish / colour: light grey
- Size / content: 5 kg, 20 kg
- Suitable for: cars, zinced steel, steel, and aluminium
- Corrosion protection
Technical data
| Product type | Primer |
| Size / content | 5 kg, 20 kg |
| Finish / colour | light grey |
| Suitable for | cars, zinced steel, steel, and aluminium |
| Mixing ratio | 2:1 |
| Hardener | E 10, E 25 |
| Thinner | Mipa Thinner EP |
| Processing conditions | From +10 °C and up to 80 % relative air humidity. Ensure an adequate supply and exhaust air ventilation |
| Storage | At least 3 years in unopened original container |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table.
