Mipa Acrylic Paint Spray LM 0217 John Deere Yellow 400 ml is a ready to spray acrylic colour aerosol for repairs and small coating work in the John Deere yellow shade. It is made for agricultural, construction and industrial vehicle coating where a known equipment colour needs to be refreshed, repaired or matched on prepared parts.
The aerosol format is practical for small panels, brackets, guards, covers, touch ups and parts that do not justify spray gun setup. It gives controlled application from the can while still using Mipa acrylic topcoat aerosol quality for colour matched repair work in LM and construction machinery shades.
John Deere yellow is a strong equipment colour, so surface preparation and even application are important for a clean result. Old paint should be sanded and degreased, bare metal should receive the correct primer, and plastic or difficult substrates need suitable adhesion preparation before the colour coat is applied.
Shake the can thoroughly, spray a test pattern and apply several light coats rather than one heavy coat. Keep the aerosol moving to avoid runs and uneven film build. Allow flash off between coats and clear the nozzle after use so the can remains usable for later repairs.
Prepare the surface by sanding, cleaning and priming where needed. Shake the aerosol thoroughly, test the spray pattern and apply light even coats with proper flash off between passes.
| Item type | Acrylic colour aerosol |
|---|---|
| Colour | LM 0217 John Deere yellow |
| Content | 400 ml |
| Use area | Agricultural and industrial vehicle colour repair |
| Article number | 214000217 |
|---|---|
| EAN / GTIN | 4016176082500 |
Yes. It is supplied as a 400 ml aerosol.
Yes. Bare metal normally needs a suitable primer before colour spraying.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
