Mipa silicone remover in liquid or spray format removes silicone, grease, wax and weathering residue before the facade panel is keyed and coated. Clean edges and overlaps carefully.
Exterior metal cladding and facade panels
Metal facade panels need a clean, consistent coating approach because large exterior surfaces show roller marks, uneven gloss and poor edge preparation quickly. The specified 2K PU method focuses on prepared facade panels where a semi-gloss protective finish is required.
Mipa silicone remover in liquid or spray format removes silicone, grease, wax and weathering residue before the facade panel is keyed and coated. Clean edges and overlaps carefully.
Mipa PU 250-50 with Mipa PUR Plus Hardener A60 and Mipa 2K Thinner Normal V 25 gives the specified semi-gloss 2K PU coating method for prepared metal facade panels.
Mipa PU 250-50 price groups I, II and III represent the colour group choices for the same facade coating role. Choose the shade group that fits the building finish.
Remove exterior dirt first, then clean with Mipa silicone remover so grease, wax and silicone do not remain below the coating.
Remove loose coating, corrosion residue and chalky material. Key the facade panels evenly so the 2K PU coating has a stable surface.
Mask windows, trim, seals and wall edges. Keep panel overlaps and drainage details clean rather than flooding them with coating.
Use Mipa PU 250-50 with Mipa PUR Plus Hardener A60 and Mipa 2K Thinner Normal V 25 according to the coating information for the chosen application method.
Work in manageable sections so the semi-gloss appearance stays even from panel to panel and edges do not dry with heavy build.
Choose Mipa PU 250-50 when the job is a prepared metal facade panel that needs a consistent semi-gloss protective coating across a larger surface.
Choose price group I, II or III based on the required colour. The coating role stays the same while the colour group changes.
Facade panels show overlap marks and uneven film build easily, so divide the work into controlled sections before applying the coating.
Large facade panels reward preparation. Clean, key and mask a controlled section before mixing coating material, then keep a steady edge so adjacent panels do not show different gloss or build.
© 2026 All Rights Reserved.