Mipa silicone remover in liquid form and Mipa silicone remover spray remove grease, oil, wax and silicone contamination from boiler casings and hot equipment covers before sanding or coating work starts.
Coatblend guided shopping
Paint boiler casings and hot equipment covers needs a clean metal surface, controlled sanding and a coating that is actually made for heat. Boiler casings and hot covers need a clean service finish that tolerates heat while keeping vents, access points and identification plates usable. This guide focuses on Mipa silicone remover, MP Hand Block Soft and Mipatherm formats for a practical high temperature finish.
Mipa silicone remover in liquid form and Mipa silicone remover spray remove grease, oil, wax and silicone contamination from boiler casings and hot equipment covers before sanding or coating work starts.
MP Hand Block Soft 128 x 63 mm helps key curved and shaped metal areas so the abrasive follows the part without creating harsh flat spots.
Mipatherm is a silicone resin based high heat coating for steel surfaces that need a black or silver finish with heat resistance up to 800 °C.
Mipatherm Spray 400 ml gives the same high heat direction in a convenient aerosol for smaller parts, edges and local work where spray gun preparation is unnecessary.
Let boiler casings and hot equipment covers cool completely, then remove loose rust, soot, flaking paint and road dirt before solvent cleaning begins.
Use Mipa silicone remover or the aerosol cleaner to lift oily residue so sanding does not rub contamination deeper into the surface.
Use the soft hand block to key broad panels and shaped edges, then remove sanding dust and silicone residue before the coating stage starts.
Use thin, even coats of Mipatherm or Mipatherm Spray and keep the film controlled rather than heavy. The coating is ready to use and does not need hardener.
Allow the coating to dry as directed before the part returns to heat. Gradual first heat exposure is safer than forcing a freshly coated part straight into severe service.
Choose the 750 ml, 4 l or 20 l Mipatherm format when boiler casings and hot equipment covers can be coated with spray equipment or another suitable professional application method.
Choose the 400 ml aerosol for local repairs, edges, small shields and parts where setting up spray equipment would slow the job down.
Black gives a matt technical finish, while silver suits visible heat parts where a metallic service finish looks more natural.
Do not coat warning labels, vents, seals, fastener heads that need regular access or surfaces that must transfer heat in a controlled way. Mask these areas before spraying.
© 2026 All Rights Reserved.