Mipa Paint Spray RAL COLOR RAL 6031 Bronze green matt 400 ml is a ready to spray 1K acrylic aerosol for colour coating in the RAL 6031 Bronze green shade, also known as NATO olive in this listing. The matt finish gives the colour a subdued, low sheen appearance that suits utility parts, equipment, outdoor details and prepared surfaces where a gloss finish would look too reflective.
RAL 6031 brings a strong olive green tone with a practical technical character. It can be used for local repairs, fresh colour on small parts and colour matched work where the recognised RAL code matters. The aerosol format makes it convenient for controlled jobs without mixing paint or preparing a spray gun.
Mipa RAL COLOR is based on fast drying 1K acrylic quality. The available selection is scratch and shock resistant, lightfast, non yellowing and durable after curing. Proper sanding, degreasing and primer selection remain important, especially on bare metal, plastic or old coatings with unknown compatibility.
Shake the can thoroughly, test the spray pattern and build the colour with light even coats. Keep the aerosol moving while spraying and allow flash off between coats. Clear the valve after use to keep the nozzle ready for later touch ups.
Prepare the substrate carefully, shake the aerosol well and apply 2 to 3 light coats from the correct distance. Allow short flash off time between coats and clear the valve after spraying.
| Item type | 1K acrylic colour aerosol |
|---|---|
| Colour | RAL 6031 Bronze green, NATO olive |
| Finish | Matt |
| Content | 400 ml |
| Article number | 214006031STM |
|---|---|
| EAN / GTIN | 4016176164503 |
Use the coating system required for the surface and desired result. The aerosol itself gives the listed matt colour finish.
Bare metal normally needs a suitable primer first. Surface preparation and primer choice strongly influence adhesion and durability.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
