Mipa Paint Spray RAL COLOR RAL 9002 Grey white 400 ml is a premium 1K acrylic aerosol for precise colour matched coating in the standard RAL 9002 shade. The spray lays down a soft off white with a light grey cast, making it useful on cabinets, housings, appliance style parts, service panels, trim pieces and prepared coated parts. It gives a compact way to coat small and medium sized parts without setting up a full spray gun system.
The aerosol format is practical for touch ups, part refinishing and new coating on prepared surfaces. Grey white works especially well where the finish needs to look intentional rather than improvised. The shade reads as neutral, calm and less stark than traffic white, which helps repaired sections and freshly coated components fit naturally into existing RAL based surroundings.
Mipa RAL COLOR aerosol paint is built on fast drying 1K acrylic quality. The coating is scratch resistant, shock resistant, lightfast and non yellowing, with a hard surface after curing. That makes it suitable for parts that need a neat colour finish and everyday handling resistance, provided the substrate is cleaned, sanded and primed where needed.
Correct preparation remains important. Old coatings should be cured and sanded. Bare or sensitive substrates need the suitable primer system before the colour coat. Apply thin even coats rather than flooding the surface, then allow the coating to flash and cure before assembly, masking removal or further handling.
Shake the aerosol for 1 to 2 minutes before spraying. Apply 2 to 3 even coats at the correct distance, allowing 3 to 5 minutes between coats. A typical dry film build is 40 to 50 µm. Spray the valve clear after use and allow coated parts to cure fully before assembly.
| Item type | 1K acrylic colour aerosol |
|---|---|
| RAL code | RAL 9002 |
| Colour | Grey white |
| Finish | Gloss |
| Content | 400 ml |
| Recommended coats | 2 to 3 spray coats |
| Typical film build | 40 to 50 µm |
| Article number | 214009002 |
|---|---|
| EAN / GTIN | 4016176089325 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
